Important information to operate the visualisation:

1) To start this visualisation copy the complete folder onto your drive C: and
    double click onto the .EXE file.
    This wil not install any programs on your computer.

2) While using this program a window might pop up asking for a password
    continue by pressing the Enter key on your keyboard (do not click onto OK).

3) To end this visualisation program just click onto the logo in the upper right corner.
    On the following window you will be asked wether or not you want to 
    SHUT DOWN this PC (click onto YES) or  to END this Program (click onto NO).
    Click onto NO to just end this visualisation !

Additional Information:
- Only in our Demo-Visualisation (e.g."esbTCP.EXE") you can simulate alarms and push buttons

  e.g. Alarms: 
  Click onto the button "TEST Alarms, DEMO only" and all programmed alarms will be 
  activated and will be shown on the screen. 
  This function is only available while running in the demo mode.

  e.g. push button/switch:
  On the home screen you can simulate a control switch for the room lights.
  Click onto the grey push button and its colour will change indicating
  that the room light has been switched on.

- On any other individual and project related visualisation these demo functions might not available.
  These controls and alarms usually do require a hardwired input to the panel.


The files must not be circulated or duplicated without the written
permission of elektro systembau bender GmbH+Co KG.

All rights reserved.
Right to technical modifications reserved!
  

esb - elektro systembau bender GmbH+Co KG
Robert-Bosch-Str. 10
35305 Grünberg, Germany

Tel: ++49 6401 2266 0
e-mail: info@esb-gmbh.com
web: www.esb-gmbh.com